Forklift Red Zone Light
Forklifts are heavy and have a large turning radius and can run over the feet of people who are standing too close to the machine. Having a projected light on the floor will remind them to stand outside the perimeter and avoid getting crushed by forklifts in operation.
Crane Siren (Audio and Visual Alarm)
This strobe siren alarm device is also called sound and light alarm, widely used in industry, giving warning signals through sound and light. It is developed to satisfy customer’s special requirements to alarm loudness and installation position, widely used in some dangerous operation area or the area where need high-power sound playing to give hazard warning signal, such as large hoisting machinery, engineering vehicles, company and other areas
Overhead Crane Warning Light
Overhead crane safety lights provide a visual warning to pedestrian and motorized traffic in the immediate vicinity of the crane. They indicate the motion of the crane, as well as the location of the hook and/or load to anyone on the ground.
Blue Spotlight
These lights project a beam of light onto the floor ahead of or behind a moving vehicle (depending on light placement) to help warn people up to 15 feet in advance.
Arc Light
The Arc Light is designed to alert pedestrians of the rear end swing of the forklift. Multiple light configurations can be used for increased visibility and to keep pedestrians away from both the front and back of the forklift or to create a halo around the truck. Each Arc Light includes hardware and mounting bracket for easy installation in a variety of configurations
Beacon light
The main purpose of Beacon or strobe lights is for safety of the people inside and outside the vehicle. People outside of the vehicle will know where the vehicles are and individuals within the vehicle are also safer as larger industrial vehicles will be alerted to their presence.
2 point/3 point Seat Belt Reminder system
Seat belt reminders are intelligent, visual and audible devices that detect whether seat belts are in use in various seating positions and give out increasingly urgent warning signals until the belts are used.
Proximity Warning System (Collision Avoidance System)
Proximity Warning System (Collision Avoidance System) warns the pedestrians and other forklifts through light and sound. It avoids the risk of damage and injuries on the shop floor.
Rear view camera system
Vehicle reversing cameras not only save money by reducing minor accidents, they also save lives by giving drivers increased visibility behind their vehicles. Reverse cameras can help you park more quickly and safely.
Mast camera system
Forklifts are one of the most common causes of accidents in the workplace The reason? The driver doesn't have a good enough view. Installing the mast camera system will significantly reduce the risk of accidents and, what's more, productivity will increase and costs arising from damage will fall. truck is carrying a load, which causes a number of blind spots. Fitting cameras to a forklift increases safety because the cameras give the driver a clear view of the floor in front of the truck. Cameras can provide a view of obstacles and of areas that would otherwise be blind spots, helping to prevent accidents. A Mast camera system gives drivers a better view, which means that they can save time and increase productivity. A driver using Mast Camera can work twice as fast as a driver who is not using a camera system.
Fork camera system
Forklifts are important for ensuring that the production chain’s operations run smoothly.A lift truck, on the other hand, is used for more than just warehouse maneuvering. To ensure that there are no mishaps or injuries, the operators and all parties involved must put in a great deal of effort. The forklift camera system will make operations run more smoothly and efficiently. This makes it easier to avoid inserting the forks wrongly and increases protection when picking up or putting down pallets.
Carriage camera system
The camera is mounted on the fork carriage or on the mast cross-beam of the innermost mast section, giving the driver a clear view of the forks or other front-end attachments through the monitor. This enables the driver to maneuver the truck into the best possible position to pick up or lay down goods correctly on the first try, reducing the risk of injury and accidents.
360/270 degree camera system
This system helps in getting a bird eye view of the vehicle and it avoids any accident in 360/270-degree. The 360/270-degree camera system shows nearby obstacles, helping you avoid impacts.
Pre-Start Alarm
Pre-Start Alarm is a safety alert system installed in heavy vehicles/equipment to alert the nearby vehicles and people that the vehicle is going to move from its position after the pre-set time. It will restrict the driver to operate the vehicle suddenly, the vehicle will not start until the Pre-set time is completed.
Reverse alarm
Forklift pedestrian injuries are a constant worry for operations and safety managers. A backup alarm could be the perfect solution to alert drivers and pedestrians of potential danger. A forklift reverse alarm that sounds when a forklift is driven in reverse. These devices are used to warn and alert nearby pedestrians to prevent potential accidents with a moving forklift.
Battery cut off switch
Battery disconnect switches are designed to cut-off electrical power, help protect against electrical fires and theft when equipment is not in use. They also provide a reliable way to shut down electrical power during maintenance and protect batteries from excessive drain. Installing a battery cut-off switch is usually done either for safety considerations or as an anti-theft precaution.
Forklift Speed Limiting Device
This forklift speed limit device is designed for motor vehicles, especially for forklift, to reduce forklift accidents, good for the forklift and people's safety. Widely applied to electric and diesel forklift, and other motor vehicles. Suitable for most of forklift models. It can just be overspeed alarm device. You can set the speed value via remote controller. When the forklift is over speed, the device will automatically give sound and light alarm, horn alarming and alarm light flashing. It is not overspeed alarm, also a speed limiter. When forklift overspeed, the device will limit the speed. In a word, this is a good speed governor system
Tag based pedestrian alert system
forklift tag based pedestrian collision avoidance system : Ultra Wide Band (UWB) RF wireless technology to precisely measure the distance between vehicles and pedestrians or two vehicles to provide a highly reliable collision warning solution. Active UWB tags warn pedestrians with audible and/or vibration alarms. Vehicle-mounted devices monitor "Danger" and "Hazard" zones around moving vehicles. And a fixed-site version of the system monitors accident-prone areas, such as high-traffic aisles, intersections, blind spots etc.
Warehouse blind corner avoidance system
Blind Corner collision avoidance is the collision warning system designed to reduce or eliminate accidents at blind corner intersections. When motion is detected on both sides of the corner, creating conditions for an accident, Collision Corner systen sends a visual and audio alert to warn of approaching traffic. Collision Corner system is easy to install, self-powered, compact, highly visible and reliable.
Biometric Access Control System
Biometric Access Control System is an intelligent device which prevents unauthorized use of your vehicle. We can register multiple drivers also in this device who can use the vehicle. Driver needs to punch his finger to start the vehicle and it allows for ignition only if driver is authorized otherwise it blocks the ignition permission.
Forklift Fork Guide Laser Light
Laser alignment guide light is designed to provide forklift truck operators a guide, via laser beam technology, helps operators place forks more accurately, reduce product damage and increasing safety, profit and productivity.